deathdrink6
deathdrink6
0 active listings
Last online 1 year ago
Registered for 1+ year
Send message All seller items (0) www.selleckchem.com/products/cremophor-el.html
About seller
Light-field microscopy is a scanless volumetric imaging technique. Conventional color light microscope employs a micro-lens array at the image plane and samples the spatial, angular, and color information by a pixelated two-dimensional (2D) sensor (such as CCD). However, the space bandwidth product of the pixelated 2D sensor is a fixed value determined by its parameters, leading to the trade-offs between the spatial, angular, and color resolutions. In addition, the inherent chromatic aberration of the micro-lens array also reduces the viewing quality. Here we propose full-color light-field microscopy via single-pixel imaging that can distribute the sampling tasks of the spatial, angular, and color information to both illumination and detection sides, rather than condense on the detection side. Therefore, the space bandwidth product of the light-field microscope is increased and the spatial resolution of the reconstructed light-field can be improved. In addition, the proposed method can reconstruct full-color light-field without using a micro-lens array, thereby the chromatic aberration induced by the micro-lens array is avoided. Because distributing the three sampling tasks to both the illumination and detection sides has different possible sampling schemes, we present two sampling schemes and compare their advantages and disadvantages via several experiments. Our work provides insight for developing a high-resolution full-color light-field microscope. It may find potential applications in the biomedical and material sciences.Due to the strongly concentrated electromagnetic field and the ability to detect the below-bandgap photon energies, surface-plasmon-based photodetections have attracted considerable attention. However, the manipulation of plasmonic resonance is complicated with a high cost in fabrication; moreover, the performance of hot-electron photodetectors is generally unsatisfactorily low. Here, we demonstrated that a tunable absorption can be realized by using the nanohole patterned metal-spacer-metal (MSM) structure, which can be wafer-scale fabricated by the nanosphere lithography technology. The angle- and polarization-insensitive absorption is realized under the excitation of the gap-mode plasmons, which can be facilely manipulated in the near-infrared band by varying the thicknesses and material of the spacer as well as the diameter and period of the nanohole arrays. An asymmetrically bended electrical system is proposed to efficiently convert the highly absorbed photon energies into the photocurrent. Results show that the responsivity of the prepared MSM structure can be up to ∼2.82 mA/W at the wavelength of 1150 nm.Stress-induced polarity inversion of crystal quartz using a quasi-phase matching (QPM) stamp is proposed for a QPM frequency conversion quartz device. Fabrication of QPM structure in x-cut quartz plate could be realized using the periodically patterned QPM stamp. Also, second-harmonic 532 nm generation with 16.8 kW peak intensity was demonstrated using a QPM quartz device with QPM period of 124 µm (3rd-order QPM) to confirm its polarity-inverted structure.Using the quantitative rescattering model, we simulate the correlated two-electron momentum distributions for nonsequential double ionization of helium by 800 nm laser pulses at intensities in the range of (2 - 15) × 1014 W/cm2. The experimentally observed V-shaped structure at high intensities [A. Rudenko et al., Phys. Rev. Lett. 99, 263003 (2007)] is attributed to the strong forward scattering in laser-induced recollision excitation and the asymmetric momentum distribution of electrons that are tunneling-ionized from the excited states. The final-state electron repulsion also plays an important role in forming the V-shaped structure.A bound state between a quantum emitter (QE) and surface plasmon polaritons (SPPs) can be formed, where the excited QE will not relax completely to its ground state and is partially stabilized in its excited state after a long time. We develop some theoretical methods for investigating this problem and show how to form such a bound state and its effect on the non-Markovian decay dynamics. We put forward an efficient numerical approach for calculating the analytical part of the self-energy for frequency below the lower energy threshold. We also propose an efficient formalism for obtaining the long-time value of the excited-state population without calculating the eigenfrequency of the bound state or performing a time evolution of the system, in which the probability amplitude for the excited state in the steady limit is equal to one minus the integral of the evolution spectrum over the positive frequency range. With the above two quantities obtained, we show that the non-Markovian decay dynamics of an initially excited QE can be efficiently obtained by the method based on the Green's function expression for the evolution operator when a bound state exists. A general criterion for identifying the existence of a bound state is presented. The performances of the above methods are numerically demonstrated for a QE located around a metal nanosphere and in a gap plasmonic nanocavity. Numerical results show that these methods work well and the QE becomes partially stabilized in its excited state at a long time for the transition dipole moment beyond its critical value. In addition, it is also found that this critical value is heavily dependent on the distance between the QE and the metal surface, but nearly independent on the size of the nanosphere or the rod. Our methods can be utilized to understand the suppressed decay dynamics for a QE in an open quantum system and provide a general picture on how to form such a bound state.The use of flat diffractive optical elements (DOEs) for broadband applications, e.g. conventional optical systems, requires DOEs that maintain high efficiencies across the required range of wavelengths, angles of incidence, and grating periods. Here we introduce a general framework for how dispersion engineering can be used to design DOEs that fulfill these requirements and use our approach to determine design rules for broadband DOEs. Our analysis shows that the key to making échelette-type gratings (EGs) suitable for broadband optical systems is the development of new optical materials with specific uncommon dispersion properties. selleck Subsequently, we use our framework to design a representative range of prototype EGs, which allows us to link the specifications of an optical system to the requirements on the EGs' materials. Finally, we show that our design rules apply to all DOEs based on propagation delays including GRIN DOEs and metagratings. Our design rules therefore guide the way towards unlocking the full potential of DOEs for different kinds of broadband applications.

deathdrink6's listings

User has no active listings
Are you a professional seller? Create an account
Non-logged user
Hello wave
Welcome! Sign in or register