This work identifies the different roles of Cu and Mn entities in toluene oxidation and provides the novel design strategy for toluene removal catalysts.Controllable recycling of End-of-life rechargeable nickel-metal hydride (Ni-MH) batteries and by-products of steelmaking to added-value functional nanostructures is desired but challenging. The present work introduces an innovative and high-yield microrecycling strategy to simultaneous synthesis of TM alloy (i.e., Ni-based superalloy) and RE oxide (REO) nanostructures from obsolete Ni-MH batteries mixed with zinc-rich electric arc furnace dust (EAFD). U0126 inhibitor This strategy involves integration of high-temperature thermal isolation followed by thermal nanowiring techniques. The impure thermally-isolated REOs were purified and transformed into one dimensional (1D) nanorods of hybrid REOs. Besides, during high-temperature thermal isolation, defect-rich ZnO with tailored structures of nanorods and nanoribbons were fabricated using controllable vapour deposition. The electrochemical performance of ZnO nanoribbons for oxygen evolution reaction (OER) revealed a considerable overpotential reduction of 131 mV (18%) compared to pure commercial nano-ZnO. This approach is transformational in providing a scalable and cost-effective pathway to facilitate recycling of the challenging, yet critical, waste materials into functional nanostructures for energy and environmental applications.There are challenges in developing multifunctional materials that can not only effectively adsorb but also completely eliminate organic contaminants in water. In this work, novel ZnO/biochar nanocomposites were synthesized using a facile ball-milling method. A series of characterization results showed that the ZnO nanoparticles dispersed uniformly on carbon surface within the biochar matrix. Ball milling increased the mesopores and macropores of the nanocomposites by breaking biochar and squeezing ZnO. The addition of appropriate amount of ZnO into biochar enhanced both the adsorption capacity and photocatalytic ability of the nanocomposites for methylene blue (MB) removal. When the initial concentration of MB was 160 mg/g, the nanocomposites exhibited high MB removal efficiency (up to 95.19%) under visible light through the combination of adsorption and photocatalysis. This work provides a feasible synthesis of metal oxide/biochar nanocomposites with excellent adsorption and photocatalysis properties for the treatment of organic dye wastewater.Arsenite (AsIII) antiporter ACR3 is crucial for arsenic (As) translocation and sequestration in As-hyperaccumulator Pteris vittata, which has potential for phytoremediation of As-contaminated soils. In this study, two new ACR3 genes PvACR3;2 and PvACR3;3 were cloned from P. vittata and studied in model organism yeast (Saccharomyces cerevisiae) and model plant tobacco (Nicotiana tabacum). Both ACR3s mediated AsIII efflux in yeast, decreasing its As accumulation and enhancing its As tolerance. In addition, PvACR3;2 and PvACR3;3 were expressed in tobacco plant. Localized on the plasma membrane, PvACR3;2 mediated both AsIII translocation to the shoots and AsIII efflux from the roots in tobacco, resulting in 203 - 258% increase in shoot As after exposing to 5 μM AsIII under hydroponics. In comparison, localized to the vacuolar membrane, PvACR3;3 sequestrated AsIII in tobacco root vacuoles, leading to 18 - 20% higher As in the roots and 15 - 36% lower As in the shoots. Further, based on qRT-PCR, both genes were mainly expressed in P. vittata fronds, indicating PvACR3;2 and PvACR3;3 may play roles in AsIII translocation and sequestration in the fronds. This study provides not only new insights into the functions of new ACR3 genes in P. vittata, but also important gene resources for manipulating As accumulation in plants for phytoremediation and food safety.Oxygen blown high-temperature gasification constitutes an opportunity for chemical recycling of plastic wastes. This article summarizes the results from comparative tests of combustion and gasification of two complex plastic wastes a plastic reject (PR) from processing recycled paper and an automotive shredder residue (ASR). Calculated gasification efficiencies corresponded to about 80% and 60%, respectively. Gasification resulted in lower yields of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) compared to direct combustion. A two-stage process, including gasification followed by syngas combustion, reduced the emissions of HCl and PCDD/F in the flue gas to 99%) was captured along with particulate matter (soot) during gasification. The contribution to the toxic concentration of PCDD/F was mainly from the PCDF congeners. Fly ash particulate matter from ASR combustion contained a significant proportion of zinc, which thus constitutes a great potential for use in zinc recycling.The improvement in heat transfer efficiency between the hot wall and sewage sludge was a critical issue to enhance the conductive drying performance. The drying behavior of thin-film dewatered sewage sludge was investigated based on a conductive dryer assisted with mechanical compression at hot wall temperatures of 120-210 °C. The heat and mass transfer behavior of the sludge in the conductive drying process alone was compared to those in the mechanical compression assisted conductive drying process at three external mechanical loads of 25, 100, and 200 kPa. The average drying rates with mechanical compression were higher than those without mechanical load and were enhanced with the increase of mechanical loads at 210 °C. The extrusion of interfacial vapor film and the reduction of sludge surface roughness was responsible for the enhanced interfacial heat transfer efficiency under mechanical compression. The effective moisture diffusivity, mass transfer coefficient, and effective thermal conductivity were enhanced by mechanical compression. The improved moisture transfer inside sludge and on the open surface, and the decreased heat transfer resistance of sludge was due to the generated pressure-driven flow and the reduced gas cavities in sludge, resulting in the higher drying rates. Additionally, this finding provided reference data for developing a new sludge drying method.