the stroke volume of the pump to be larger than 1 Hz. This opens avenues towards the development of new GPV, pump, and mixers in order to mix efficiently the solvent packets delivered by conventional LC instrument.Dual-channel chromatography was evaluated for pesticide residue analysis in fruits and vegetables and for unknown compounds detection. A dual-channel system was tested coupled to triple quadrupole and high-resolution mass spectrometry. The first part of the investigation was related to the improvement of the sample throughput with a 100 mm column. The dual-channel system provided the same analytical results as the single-channel system, however, with the throughput higher of about 70% (80 injections vs 137 injections in 24 h). Two types of calibration (in-channel and cross-channel) were checked. In the article, also solvent consumption is discussed. Six proficiency test samples were analysed to assess the quality of the results. Nor false positives neither false negatives were found. Calculated z-scores were typically less then 1. In the second part, a different approach was investigated. The 100 mm column was replaced by a 150 mm column keeping shorter run times than single channel system and 100 mm. The longer column improved the sensitivity and selectivity what was demonstrated in the target pesticide residue analysis. Additionally, the 150 mm column was compared with the 100 mm column in the analysis of unknown natural matrix compounds by high resolution mass spectrometry. The longer column allowed to detect up to 26% unknown compounds more than the shorter column.Industrial separation technologies can be improved and greatly simplified by using the methods of counter-current chromatography (CCC). We have previously proposed the use of currently available solvent extraction equipment (a series of multistage columns, a cascade of centrifugal mixer-settler extractors) as large-scale CCC devices. For industrial separations, the application of closed-loop recycling counter-current chromatography (CLR CCC) methods seems to be the most promising. To improve the performance of the CLR CCC separations, semi-continuous three-stage processes (1 - continuous loading of the mixture solution over a definite time; 2 - separation of solutes in recycling closed-loop; 3 - elution of the fractions of the separated solutes with the mobile phase) can be used. selleck chemicals llc The purpose of this study is to present a simple and easy to use mathematical model allowing the simulation and design of various options for implementing such separation processes and analyze the influence of its main parameters on separation efficiency.A Poly (3,4-ethylenedioxothiophene) (PEDOT)/UiO-66 composite was electrodeposited on an etched stainless-steel wire as head-space solid-phase microextraction (HS-SPME) coating. A robust, well controlled thickness, and uniform coating of metal organic framework composites can be realized by the electrodeposited strategy. The incorporated UiO-66 not only enhanced the uniformity and stability of the composite coating, but also effectively decreased the stacking phenomenon of PEDOT and improved its extraction efficiency, which was over 100 times higher than that of the PEDOT coating without UiO-66. The composite coating was used to enrich seven types of volatile organic compounds (VOCs) in ion-exchange resins, including methyl cyclohexane, benzene, toluene, ortho-xylene, styrene, para-xylene and divinyl-benzene. The results of adsorption isotherm analysis showed that π stacking effect played dominant role between the composite coating and VOCs in the extraction process. The composite coating was characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared and thermogravimetric analysis, respectively. A determination method for seven kinds of VOCs was established by HS-SPME coupled with gas chromatography-flame ionization detection (GC-FID). Under the optimal experimental conditions, the detection linear range (LRs) was 0.09-100 ng mL-1, and the detection limit (LODs) was 0.03-0.06 ng mL-1 (S/N = 3). The method was applied for the migration detection of VOCs in four types of ion-exchange resin, which showed satisfactory recovery (84.5-117.2%).An accurate, sensitive and selective analytical method is proposed for sulfonamide residues analysis in infant formulas based on hydrophilic interaction liquid chromatography (HILIC) and quadrupole time-of-flight mass spectrometry in full scan mode. The sample preparation approach involves low-temperature lipid precipitation followed by dispersive solid-phase extraction with PSA and C18 sorbents, which was successfully optimized using Plackett-Burman design. In order to achieve high analytical sensitivity, the influence of HILIC conditions on sulfonamide ionization was investigated, such as the mobile phase composition, buffer concentration, and sample diluent for injection. The method performance characteristics, including linearity (range 5-120 µg kg-1), reliable limits of quantification (between 5 and 20 µg kg-1), recovery (72.9-109.2%) and precision (coefficient of variation values ≤ 19.8%) under repeatability and within-laboratory reproducibility conditions, were in accordance with the Codex Alimentarius Commission CAC/GL 71-2009 for quantitative analytical methods for veterinary drug residues in foods. Moreover, adequate identification of the compounds was provided with accurate mass measurement of both precursor and fragment ions in one single run. Finally, the developed method was applied to thirty-five powdered milk-based infant formula samples available in the Brazilian market.In this paper, a low-cost, rapid, easy, and potentially portable tool for the identification of cocaine and its semi-quantitative determination in oral fluid has been proposed. A field collection device has been designed, based on a cotton pad with an indicator and a molecularly imprinted polymer (MIP) sorbent, to selective retain cocaine from oral fluid components. After sample collection, cocaine is transferred by using phosphate buffer to the MIP and then eluted with 2-propanol. The obtained extract is analysed by ion mobility spectrometry (IMS), providing a cut-off value of 20 µg L-1 that identifies 100 % true-positive and 95 % true-negative samples. The MIP-IMS procedure has been validated by the analysis of oral fluid samples, collected from cocaine users at recreation environments, by comparing the results with lateral flow immunoassay and chromatographic reference methods. Thus, the proposed methodology allows a simple and fast cocaine identification that can be carried out in field by non-specialized personnel, such as health personnel, law enforcement bodies, and customs staff.