Biotech nanocellulose (bacterial nanocellulose, BNC) is a high potential natural polymer. Moreover, it is the only cellulose type that can be produced biotechnologically using microorganisms resulting in hydrogels with high purity, high mechanical strength and an interconnecting micropore system. Recently, the subject of intensive research is to influence this biosynthesis to create function-determining properties. This review reports on the progress in product design and today's state of technical and medical applications. A novel, dynamic, template-based technology, called Mobile Matrix Reservoir Technology (MMR Tech), is highlighted. Thereby, shape, dimensions, surface properties, and nanonetwork structures can be designed in a process-controlled manner. The formed multilayer materials open up new applications in medicine and technology. Especially medical materials for cardiovascular and visceral surgery, and drug delivery systems are developed. The effective production of layer-structured composites and coatings are important for potential applications in the electronics, paper, food and packaging technologies.Vitexin of Ficus deltoidea exhibits intestinal α-glucosidase inhibitory and blood glucose lowering effects. This study designs oral intestinal-specific alginate nanoparticulate system of vitexin. Nanospray-dried alginate, alginate/stearic acid and alginate-C18 conjugate nanoparticles were prepared. Stearic acid was adopted to hydrophobize the matrix and minimize premature vitexin release in stomach, whereas C-18 conjugate as immobilized fatty acid to sustain hydrophobic effect and drug release. Nanoparticles were compacted with polyethylene glycol (PEG 3000, 10,000 and 20,000). The physicochemical, drug release, in vivo blood glucose lowering and intestinal vitexin content of nanoparticles and compact were determined. Hydrophobization of alginate nanoparticles promoted premature vitexin release. GW806742X molecular weight Compaction of nanoparticles with PEG minimized vitexin release in the stomach, with stearic acid loaded nanoparticles exhibiting a higher vitexin release in the intestine. The introduction of stearic acid reduced vitexin-alginate interaction, conferred alginate-stearic acid mismatch, and dispersive stearic acid-induced particle breakdown with intestinal vitexin release. Use of PEG 10,000 in compaction brought about PEG-nanoparticles interaction that negated initial vitexin release. The PEG dissolution in intestinal phase subsequently enabled particle breakdown and vitexin release. The PEG compacted nanoparticles exhibited oral intestinal-specific vitexin release, with positive blood glucose lowering and enhanced intestinal vitexin content in vivo.Aminated cellulose nanofibers (A-CNF) with high thermostability (>350 ℃), high crystallinity (81.25 %), and high dispersion stability were extracted from "biological grinding" biomass through one-pot microwave-hydrothermal synthesis. Worm-eaten wood powder (WWP) as the product of "biological grinding" by borers is a desirable lignocellulose for fabricating A-CNF in a green and cost-effective way since it is a well-milled fine powder with dimension of dozens of microns, which can be used directly, saving energy and labor. Generated A-CNF proved to be an excellent reinforcing and curing agent for constructing high performance epoxy nanocomposites. The nanocomposites exhibited a thermal conductivity enhancement of about 120 %, coefficient of thermal expansion reduction of 78 %, and Young's modulus increase of 108 % at a low A-CNF loading of 1 wt.%, demonstrating their remarkable reinforcing potential and effective stress transfer behavior. The process proposed herein might help to bridge a closed-loop carbon cycle in the whole production-utilization of biomass.The conditions determining network-forming and aggregation properties of hyaluronan on the mica surface were studied. The hyaluronan was deposited on the surface from aqueous and saline solutions and attached by a bivalent cation. The morphology of the immobilized assemblies was characterized by atomic force microscopy. The experimental results show that the morphology and size of the aggregates as well as the density of the interconnecting fibrillar network, both made of hyaluronan, at the liquid-solid phase interface are determined not only by its molecular weight or concentration in solution, but also by the dissolution conditions and storage time. These findings extend the current state of knowledge about the conformational variability of this biologically important polymer. Understanding the conformational variability is of great importance, as it governs the physiological functions of hyaluronan, as well as its processability and formulations. That in turn determines its usability in different pharmacological and biomaterial applications.The semisynthetic polysaccharide cellouronate is a β-1,4-linked polyglucuronic acid prepared from regenerated cellulose by chemical oxidation. Here, we isolated a novel enzyme, MyAly, as a cellouronate lyase from a scallop Mizuhopecten yessoensis. Its optimum temperature, pH, and NaCl concentration for cellouronate degradation were determined to be 30 °C, 6.9, and 200-500 mM, respectively. MyAly endolytically degraded cellouronate into unsaturated di-, tri-, and tetrasaccharides with kcat of 31.1 s-1. MyAly also showed an alginate-degradation activity with a kcat value of 0.58 s-1. However, there was no significant difference in Km values between cellouronate and alginate. MyAly consisted of 280 amino acids and shared 36.5-44.1 % identity with known marine gastropod alginate lyases belonging to the polysaccharide lyase family 14. This is the first study to identify and characterize a cellouronate-degrading lyase from a marine organism, providing a better understanding of the biodegradability of the industrially important polysaccharide, cellouronate, in marine environments.In this work we present a simple, inexpensive, and easily scalable industrial paper process to prepare sheets of conductive cellulose fibers coated with polyanilines. First, bare fibers were coated by in situ oxidative polymerization of polyaniline then, the resulting composite fibers were used to fabricate electroactive sheets. The resistivity of the sheets is 14 ± 1 Ω sq-1, a value around 1000 times lower than those reported in literature. The superior electronic proprieties of the sheets were demonstrated by assembling a capacitive touch sensor device with optimized geometry. The touch sensor shows an increase of 3-4 % of the starting electric capacity after compression and a fast response time of 52 ms. To our knowledge this is the first time that a device is prepared in this way and therefore, the herein presented results can bring an significant improvement in the development of low-cost, green and high-tech electronic devices.